SPS Problems
-
oh yeah, that's probably it
you say that you're using the lollipop too. if so do you also have the wholesome dependencies installed too?
@kazan-in-a-tank said in SPS Problems:
oh yeah, that's probably it
you say that you're using the lollipop too. if so do you also have the wholesome dependencies installed too?
i just added it and need to test it later in vr, before i didnt had it installed
-
I've been fine using the lollipops for different bases, but I can't figure out how to successfully add SPS to non-lollipop models, and I haven't found any good resources to give step-by-steps on how to properly do that. Does anyone have any good instructions for that?
-
I've been fine using the lollipops for different bases, but I can't figure out how to successfully add SPS to non-lollipop models, and I haven't found any good resources to give step-by-steps on how to properly do that. Does anyone have any good instructions for that?
@SweetSangria said in SPS Problems:
I've been fine using the lollipops for different bases, but I can't figure out how to successfully add SPS to non-lollipop models, and I haven't found any good resources to give step-by-steps on how to properly do that. Does anyone have any good instructions for that?
You talking about Male or Female Models ?
-
alright then yeah hopefully that'll fix it
honestly i'm surprised you hadn't ran into any other system issues preventing you from even uploading to begin with
@kazan-in-a-tank said in SPS Problems:
alright then yeah hopefully that'll fix it
honestly i'm surprised you hadn't ran into any other system issues preventing you from even uploading to begin with
nvm im an idiot, i had a setting in vrchat disabled which made all sps from my model didnt work...xD
-
@kazan-in-a-tank said in SPS Problems:
alright then yeah hopefully that'll fix it
honestly i'm surprised you hadn't ran into any other system issues preventing you from even uploading to begin with
nvm im an idiot, i had a setting in vrchat disabled which made all sps from my model didnt work...xD
-
@Wiener omg i called it lol XD
@kazan-in-a-tank said in SPS Problems:
@Wiener omg i called it lol XD
yeah avatars self interact was disabled idk why and now it works on all my models...xD
-
@SweetSangria said in SPS Problems:
I've been fine using the lollipops for different bases, but I can't figure out how to successfully add SPS to non-lollipop models, and I haven't found any good resources to give step-by-steps on how to properly do that. Does anyone have any good instructions for that?
You talking about Male or Female Models ?
-
@Wiener Male. The female stuff is super easy with the SPS Configurator stuff.
@SweetSangria How does one add SPS to a female model? I've looked to see if there's videos on it to no avail. (Sorry if that's a dumb question to ask)
-
@SweetSangria How does one add SPS to a female model? I've looked to see if there's videos on it to no avail. (Sorry if that's a dumb question to ask)
@Takisch Use the wholesome SPS Configurator with VRCFury in VCC. Then in Unity, it will be under the Tool Menu. Open the SPS Configurator. Select the appropriate base and foot position if you care about feet, and select/deselect what sockets you want added. You can also select the blendshapes you want associated. Then just click Add Sockets. You'll see them on the Hierarchy, and you can go through and move them around to adjust and get them lined up how you want them. If you've chosen the right base, they're usually pretty close to where they need to be anyway. It's super easy.
-
@Takisch Use the wholesome SPS Configurator with VRCFury in VCC. Then in Unity, it will be under the Tool Menu. Open the SPS Configurator. Select the appropriate base and foot position if you care about feet, and select/deselect what sockets you want added. You can also select the blendshapes you want associated. Then just click Add Sockets. You'll see them on the Hierarchy, and you can go through and move them around to adjust and get them lined up how you want them. If you've chosen the right base, they're usually pretty close to where they need to be anyway. It's super easy.
@SweetSangria Thank you so much, By far the most useful reply I've ever had. You helped out tons. I can't thank you enough man
-
@Takisch Use the wholesome SPS Configurator with VRCFury in VCC. Then in Unity, it will be under the Tool Menu. Open the SPS Configurator. Select the appropriate base and foot position if you care about feet, and select/deselect what sockets you want added. You can also select the blendshapes you want associated. Then just click Add Sockets. You'll see them on the Hierarchy, and you can go through and move them around to adjust and get them lined up how you want them. If you've chosen the right base, they're usually pretty close to where they need to be anyway. It's super easy.
@SweetSangria I only have like, one problem, the "coochie" spreading blendshape thing I don't see an option for nor understand how to set up. How do you go about that?
-
@SweetSangria Thank you so much, By far the most useful reply I've ever had. You helped out tons. I can't thank you enough man
@Takisch You're welcome. That's the way I always hope people will respond to me when I need help, with information clear enough for me to actually follow and understand.
As far as the blendshapes: I marked with red where you can do that when you set it up. Depending on the base, it'll select the blendshape name that base usually uses, but you can just click on that to go through and find the blendshape you want. It'll usually be under "Body" and you might have to scroll through to find the right one.
Another way to view the Blendshape options BEFORE you do the SPS Configurator is to just go to the Body and look there to figure out which one you want before you set up your SPS. Here's a screenshot of where to look for that, and luckily with this example it shows the NSFW options right at the top. But notice that with this one, even though it's a Venus base, the creator has set up a different name than what the Configurator automatically set. So that's why it's good to double check and make sure you're getting the right one for that specific avi.
You do have the option to set it or update it after you've gone through the SPS Configurator, and that's here under the SPS socket listed in the Hierarchy.
Hope all that made sense and helps!
-
Oh and PS: Not all avatars HAVE that option. Most NSFW models do, but not always. So if you can't find it in any of these ways, it might just not be an option.
-
Oh and PS: Not all avatars HAVE that option. Most NSFW models do, but not always. So if you can't find it in any of these ways, it might just not be an option.
@SweetSangria Yet again, super helpful! And from the looks of it this avatar doesn't have that blendshape as I suspected. So, if there isn't one there, how would I make my own? (Also I'm sorry to keep needing help haha)
-
@SweetSangria Yet again, super helpful! And from the looks of it this avatar doesn't have that blendshape as I suspected. So, if there isn't one there, how would I make my own? (Also I'm sorry to keep needing help haha)
-
@Takisch I'm afraid my helpfulness runs out here. I think you have to go into Blender to do that, and that's beyond my skill level at this point. Sorry!
@SweetSangria Aww. Well still insightful nonetheless! Thank you a bunch. You helped me out regardless!
-
@SweetSangria Aww. Well still insightful nonetheless! Thank you a bunch. You helped me out regardless!
-
@Takisch You're welcome. I'm glad it helped. Now I wish someone would help me figure out how to do the plugs in a similar way.
@SweetSangria I've been trying to figure out the plugs as well, It's a bit tedious. But There is a video on it I've seen that helps a lot. I'll try to source it again for you and hope it helps as it did me!
