GIFT:【愛莉 - AIRI】 ドリーミー・おまんこ / Dreamy Omanko 【R18】
-
links down
@thatcatoverthere as per 7/15/2026, it's still there
nya~
-
This post is deleted!
-
@thatcatoverthere as per 7/15/2026, it's still there
-
@thatcatoverthere as per 7/15/2026, it's still there
-
How to install for LilToon:
Video [do_for_milltina_v1.02_how_to_install_v1_1440p.mp4]
How to install for Poiyomi:
️KUMALY / AIRI have Poiyomi variant, you can skip step with translation materials to Poiyomi!️ (I don't have the update for Kumaly tho..)
anonfiles.com (Airi)Video [do_for_milltina_v1.02_how_to_install_poiyomi_version_v1 1440p.mp4]
How to use extra PhysBones disabler for VRCFury/Modular Avatar/Manual:
If you want to disable PhysBones in outfits, simply set the parameter “
DreamyOmanko_PB_OFF” to "1", or add the “Toggle me ON to disable Omanko PB” GameObject to your outfit and use it as a GameObject toggle set to ON.
When this object is enabled, it will automatically disable the PhysBones.UV diagram for custom content creators:
UV0- Tangent space/Normal map - Reserved only for seamless skin facture, normal map tangent calculations.
UV1- Main texture - Use it for your custom textures, made to be 100% accurate with original textures.
UV2- Tiling/Discard - Hide part of mesh vertexes (Fully usable for Poiyomi skin blending).
UV3- Blending - Reserved for Poiyomi to skip part of hand painting for custom textures (combined to work together with UV1, UV2).️ONLY FOR VERSION 1.04 OR ABOVE ️FOR CUSTOM TEXTURES, YOU CAN REPLACE ZOOMED OMANKO BODY TEXTURE WITH YOUR OWN, REMEMBER TO SET TILING FROM
10x10 (ONLY VERSION 1.04)TO1x1AND FOR OFFSETNUMBERS(DEPENDING ON AVATAR) TO0x0!!!!!! AND ALYWAYS USEUV1(FOR LILTOON SLOT "MAIN TEXTURE" IS ALWAYS UV0, INSTEAD OF IT USE MAIN TEXTURE ND 1 OR MAIN TEXTURE ND2 AND SET IT TO UV1!!!).Troubleshooting
- I don’t have the SPS option in the radial menu. (v1.00 - 1.05)
Check if the
DreamyOmanko_SPSgameobject orDreamyOmanko_SPS_Big(older versions) has aMissing Scriptcomponent on it.You most likely updated VRCFury through VRChat Creator Companion (VCC) while the Unity project was still open then clicked on the Unity window during the import process which caused
library cache data corruption.- How to fix it:
- Close the project and don’t panic, everything will be fine!
- Open your project folder in File Explorer. You should see folders such as
Assets, Packages, Logs, Library. - Delete the entire
Libraryfolder (it may be quite large).= - Launch your project again in Unity and wait for it to rebuild the Library (this may take a while depending on how many things you had in the project).
- You should see an empty scene in Unity. Just click on your scene file with your avatar in the Unity Explorer/Project window.
- After that, everything should be okay again, and the missing script should disappear and be replaced with
SPS Socket (VRCFury)plus you just gained a few GB of free space
- Inside of Omanko its not visible/empty/transparent in editor mode (v1.00 - 1.04)
That’s because my asset is built using hidden mesh sections to prevent visibility for other players when it’s turned off.
- How to make it visible in the editor:
- Click on
DreamyOmankoin the hierarchy. - In the Inspector window, find the internal material (
DreamyOmanko (INSIDE)or justDreamyOmanko). - Expand the
UV Tile Discardsection in Liltoon material. You should see the 0x1 tile selected on a 4x4 grid, uncheck that tile. - The inside should now become visible in Edit Mode. (Remember to enable it again before uploading.)
-
How to install for LilToon:
Video [do_for_milltina_v1.02_how_to_install_v1_1440p.mp4]
How to install for Poiyomi:
️KUMALY / AIRI have Poiyomi variant, you can skip step with translation materials to Poiyomi!️ (I don't have the update for Kumaly tho..)
anonfiles.com (Airi)Video [do_for_milltina_v1.02_how_to_install_poiyomi_version_v1 1440p.mp4]
How to use extra PhysBones disabler for VRCFury/Modular Avatar/Manual:
If you want to disable PhysBones in outfits, simply set the parameter “
DreamyOmanko_PB_OFF” to "1", or add the “Toggle me ON to disable Omanko PB” GameObject to your outfit and use it as a GameObject toggle set to ON.
When this object is enabled, it will automatically disable the PhysBones.UV diagram for custom content creators:
UV0- Tangent space/Normal map - Reserved only for seamless skin facture, normal map tangent calculations.
UV1- Main texture - Use it for your custom textures, made to be 100% accurate with original textures.
UV2- Tiling/Discard - Hide part of mesh vertexes (Fully usable for Poiyomi skin blending).
UV3- Blending - Reserved for Poiyomi to skip part of hand painting for custom textures (combined to work together with UV1, UV2).️ONLY FOR VERSION 1.04 OR ABOVE ️FOR CUSTOM TEXTURES, YOU CAN REPLACE ZOOMED OMANKO BODY TEXTURE WITH YOUR OWN, REMEMBER TO SET TILING FROM
10x10 (ONLY VERSION 1.04)TO1x1AND FOR OFFSETNUMBERS(DEPENDING ON AVATAR) TO0x0!!!!!! AND ALYWAYS USEUV1(FOR LILTOON SLOT "MAIN TEXTURE" IS ALWAYS UV0, INSTEAD OF IT USE MAIN TEXTURE ND 1 OR MAIN TEXTURE ND2 AND SET IT TO UV1!!!).Troubleshooting
- I don’t have the SPS option in the radial menu. (v1.00 - 1.05)
Check if the
DreamyOmanko_SPSgameobject orDreamyOmanko_SPS_Big(older versions) has aMissing Scriptcomponent on it.You most likely updated VRCFury through VRChat Creator Companion (VCC) while the Unity project was still open then clicked on the Unity window during the import process which caused
library cache data corruption.- How to fix it:
- Close the project and don’t panic, everything will be fine!
- Open your project folder in File Explorer. You should see folders such as
Assets, Packages, Logs, Library. - Delete the entire
Libraryfolder (it may be quite large).= - Launch your project again in Unity and wait for it to rebuild the Library (this may take a while depending on how many things you had in the project).
- You should see an empty scene in Unity. Just click on your scene file with your avatar in the Unity Explorer/Project window.
- After that, everything should be okay again, and the missing script should disappear and be replaced with
SPS Socket (VRCFury)plus you just gained a few GB of free space
- Inside of Omanko its not visible/empty/transparent in editor mode (v1.00 - 1.04)
That’s because my asset is built using hidden mesh sections to prevent visibility for other players when it’s turned off.
- How to make it visible in the editor:
- Click on
DreamyOmankoin the hierarchy. - In the Inspector window, find the internal material (
DreamyOmanko (INSIDE)or justDreamyOmanko). - Expand the
UV Tile Discardsection in Liltoon material. You should see the 0x1 tile selected on a 4x4 grid, uncheck that tile. - The inside should now become visible in Edit Mode. (Remember to enable it again before uploading.)
-
Only for Airi?
@Thisfufu69 the tutorial ? it work for anyone, altho i can't updating Kumaly :<
-
can i get a working link pls?
@Casper_TheAlien pretty much still working
-
@space_uwu Kumaly also seem still work just fine, it just older version
-
bump millitna pkleaseee
-
The links do not work for me thank you for blessing up though and hope you're doing and feeling great
@GnasherBlaze well if that doesn't work for u, there no other way to share this sadly, since assets creator actively DMCAed link, thank u, hope u also doing n feeling great
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login