OSC Based Fertility system from jinxxy
-
@bubblezz Im guessing no dice?
-
@LeonaTaromati Frankl;y not gotten around to testing yet X3 I've been so distracted with other things, if that or I find something else that works tho I will def post here! ^^
Update, I could not get the program to continuously update the avatar. Not sure what the issue may be, but I think it might be a problem with the exe. Might have been fixed it a later version that never got put here. I would test with an older version but I would also have to go update my avatar.
idk 
-
Update, I could not get the program to continuously update the avatar. Not sure what the issue may be, but I think it might be a problem with the exe. Might have been fixed it a later version that never got put here. I would test with an older version but I would also have to go update my avatar.
idk @bubblezz the fuck? That is really odd.... Mine after setup worked perfectly but this is odd...
Just shotting in the dark here, your exported model has the correct blend shapes and they are all set to 0 right? (Along with not being "reserved" for something like a VRCFury toggle)
-
Can someone send me a ss of where to place everything? I think I got it down but I wanna see a finished product so I can see if need to fix or adjust anything ^^
-
@bubblezz the fuck? That is really odd.... Mine after setup worked perfectly but this is odd...
Just shotting in the dark here, your exported model has the correct blend shapes and they are all set to 0 right? (Along with not being "reserved" for something like a VRCFury toggle)
@LeonaTaromati Huh, yeah idk, I maybe can try again and see if maybe I messed something up on install. Its def an odd issue as the avatar's preg level updates when I load into it, or change worlds. Just doesnt update the slider continuously. I followed the steps in the store page but maybe that was wrong?
If it's working for you, that must mean I have messed something up on installation. The blendshapes are not used by anything else on the avatar, and I think I named all of them the correct thing. Preg does work in game, just doesnt update after I first load in the avatar.
-
@ex give me a bit, I'll try to submit a few screenshots of what I have setup on mine
@LeonaTaromati If you wouldn't mind, could you send these y way too so I can cross check? ^^
-
Genuinely forgot that lol, I'll try to remember to send them, but it may have to wait for a bit since I'll be going out tomorrow
-
using this as a starting picture, look at the blendshape names and values, do they match the caps exactly? (the system is case and spacing/spelling sensitive) and are they set to 0 when in editor/on the avatar?
I usually like to lurk, dont mind me!
-
@LeonaTaromati If you wouldn't mind, could you send these y way too so I can cross check? ^^
@bubblezz pinging you for this
-
using this as a starting picture, look at the blendshape names and values, do they match the caps exactly? (the system is case and spacing/spelling sensitive) and are they set to 0 when in editor/on the avatar?
@LeonaTaromati Yes, they do. I Think I might have found the issue, but I didnt use the .exe in the unity package, I used the one they provided with the download. And that might be the issue if thats the program you use. If that is the problem, I am feeling rly dumb rn XD.
-
@LeonaTaromati Yes, they do. I Think I might have found the issue, but I didnt use the .exe in the unity package, I used the one they provided with the download. And that might be the issue if thats the program you use. If that is the problem, I am feeling rly dumb rn XD.
@bubblezz ohh wait were you using the later version? I heard that that one has some bugs that got ironed out (though someone needs to provide that version ) but I use the older one and it works fine
I usually like to lurk, dont mind me!
-
@bubblezz ohh wait were you using the later version? I heard that that one has some bugs that got ironed out (though someone needs to provide that version ) but I use the older one and it works fine
@LeonaTaromati Crap so that was probably the issue all along XD well thank you so much for all the help! Hopefully if anyone else runs into problems that can look through the string now and figure it out lmao
-
@bubblezz ohh wait were you using the later version? I heard that that one has some bugs that got ironed out (though someone needs to provide that version ) but I use the older one and it works fine
@LeonaTaromati oh also I saw your message, my rep isnt high enough for chatting tho but I can send you them ^^
-
@LeonaTaromati oh also I saw your message, my rep isnt high enough for chatting tho but I can send you them ^^
-
@bubblezz I did not realize rep restricted chat ability lol, sure
@LeonaTaromati If you dont mind can you pm me like disc or something to send it to? (Avatar could be a little recognizable to some
) -
@LeonaTaromati Did you managed to get it to work on your end? If yes would you mind if I ask is there anyway I could get in contact with you for ease of communication?
-
using this as a starting picture, look at the blendshape names and values, do they match the caps exactly? (the system is case and spacing/spelling sensitive) and are they set to 0 when in editor/on the avatar?
@LeonaTaromati Sorry for the ping but 10/10 would bark 4 LOL
-
@LeonaTaromati Did you managed to get it to work on your end? If yes would you mind if I ask is there anyway I could get in contact with you for ease of communication?
@RuneLyra Like avatar set up wise or program wise? cause if its avi setup, youll want the blendshapes to pretty much match the image i posted recently (minus the kicks), the program is case and spelling sensitive in that regard
-
Yea i really need to know if im the only one with this issue tried V1, 1.1, 1.2, an both OSC programs yes literally everything else is right cause it was working for a bit then stopped one day after Vrchat updated~ wont detect Avi anymore atall an ik its semi detecting it still cause when switching into avi with system get that error~ if anyone knows a fix plz lemme knows thx an have a good night or day~
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login