Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

NSFW Worlds (bypassed) vrcw

Gifts / Downloads

43 Posts 25 Posters 11.2k Views 69 Watching

T tare1919
Here's a simple way to open a VRCW file locally.
Just save the following as a batch file (.bat), then simply drag and drop your VRCW file onto it.
You'll need to change the GameDir and GameExe paths to match your VRChat installation.
```
@echo off

set GameDir="C:\Program Files (x86)\Steam\steamapps\common\VRChat\"
set GameExe="C:\Program Files (x86)\Steam\steamapps\common\VRChat\VRChat.exe"

if "%~1"=="" (
    echo Please drag and drop a VRCW file onto this batch file.
    pause
    exit /b
)

set "path=%~1"
set /a "randomid_a=10000+%random%"
set /a "randomid_b=10000+%random%"
set "randomid=%randomid_a%%randomid_b%"

start "" /D %GameDir% %GameExe% "--url=create?roomId=%randomid%&hidden=true&name=BuildAndRun&url=file:///%path%" --no-vr --watch-worlds --watch-avatars
```
However, due to VRChat's encryption, it's not possible to load multiple avatars using alternate accounts, so dances or animations that require two or more avatars generally won't work with this method.
If there is a VRCW hotswap method available, that would probably be a better approach, but I don't know how to do it..
K
K
Kraydawn

wrote on last edited by

#17

@tare1919 Using this bat makes the worlds run completely fine for me without issues! Thank you so much!
1 Reply Last reply

0
C Cupid_Bow referenced this topic on
A aassdd121 referenced this topic on
A
A
aassdd121

wrote on last edited by

#18

added new world
1 Reply Last reply

1
A aassdd121 referenced this topic on
A aassdd121 referenced this topic on
T tare1919
Here's a simple way to open a VRCW file locally.
Just save the following as a batch file (.bat), then simply drag and drop your VRCW file onto it.
You'll need to change the GameDir and GameExe paths to match your VRChat installation.
```
@echo off

set GameDir="C:\Program Files (x86)\Steam\steamapps\common\VRChat\"
set GameExe="C:\Program Files (x86)\Steam\steamapps\common\VRChat\VRChat.exe"

if "%~1"=="" (
    echo Please drag and drop a VRCW file onto this batch file.
    pause
    exit /b
)

set "path=%~1"
set /a "randomid_a=10000+%random%"
set /a "randomid_b=10000+%random%"
set "randomid=%randomid_a%%randomid_b%"

start "" /D %GameDir% %GameExe% "--url=create?roomId=%randomid%&hidden=true&name=BuildAndRun&url=file:///%path%" --no-vr --watch-worlds --watch-avatars
```
However, due to VRChat's encryption, it's not possible to load multiple avatars using alternate accounts, so dances or animations that require two or more avatars generally won't work with this method.
If there is a VRCW hotswap method available, that would probably be a better approach, but I don't know how to do it..
S
S
SquidieBlendie

wrote on last edited by

#19

@tare1919 possible for this work on vr
1 Reply Last reply

0
N
N
Nicenick

wrote on last edited by

#20

Bump for ragdoll link, it's broken
1 Reply Last reply

0
T tare1919
Here's a simple way to open a VRCW file locally.
Just save the following as a batch file (.bat), then simply drag and drop your VRCW file onto it.
You'll need to change the GameDir and GameExe paths to match your VRChat installation.
```
@echo off

set GameDir="C:\Program Files (x86)\Steam\steamapps\common\VRChat\"
set GameExe="C:\Program Files (x86)\Steam\steamapps\common\VRChat\VRChat.exe"

if "%~1"=="" (
    echo Please drag and drop a VRCW file onto this batch file.
    pause
    exit /b
)

set "path=%~1"
set /a "randomid_a=10000+%random%"
set /a "randomid_b=10000+%random%"
set "randomid=%randomid_a%%randomid_b%"

start "" /D %GameDir% %GameExe% "--url=create?roomId=%randomid%&hidden=true&name=BuildAndRun&url=file:///%path%" --no-vr --watch-worlds --watch-avatars
```
However, due to VRChat's encryption, it's not possible to load multiple avatars using alternate accounts, so dances or animations that require two or more avatars generally won't work with this method.
If there is a VRCW hotswap method available, that would probably be a better approach, but I don't know how to do it..
K
K
Klerd

wrote on last edited by

#21

Is it cant load ur avatar model? I read that it has issues with multiple avatar animations, but i tried a few worlds and i had test-avatar, not mine, i dont really get it sry
1 Reply Last reply

0
T tare1919
Here's a simple way to open a VRCW file locally.
Just save the following as a batch file (.bat), then simply drag and drop your VRCW file onto it.
You'll need to change the GameDir and GameExe paths to match your VRChat installation.
```
@echo off

set GameDir="C:\Program Files (x86)\Steam\steamapps\common\VRChat\"
set GameExe="C:\Program Files (x86)\Steam\steamapps\common\VRChat\VRChat.exe"

if "%~1"=="" (
    echo Please drag and drop a VRCW file onto this batch file.
    pause
    exit /b
)

set "path=%~1"
set /a "randomid_a=10000+%random%"
set /a "randomid_b=10000+%random%"
set "randomid=%randomid_a%%randomid_b%"

start "" /D %GameDir% %GameExe% "--url=create?roomId=%randomid%&hidden=true&name=BuildAndRun&url=file:///%path%" --no-vr --watch-worlds --watch-avatars
```
However, due to VRChat's encryption, it's not possible to load multiple avatars using alternate accounts, so dances or animations that require two or more avatars generally won't work with this method.
If there is a VRCW hotswap method available, that would probably be a better approach, but I don't know how to do it..
G
G
God8809

wrote on last edited by

#22

@tare1919 i turned it into a bat but every time i drag my VRCW onto the bat the bat just closes for sum reason
J 1 Reply Last reply

1
N
N
Nicenick

wrote on last edited by

#23

Bump
A 1 Reply Last reply

0
C
C
craftingdead261

wrote on last edited by

#24

how do you do this?
1 Reply Last reply

0
G God8809

@tare1919 i turned it into a bat but every time i drag my VRCW onto the bat the bat just closes for sum reason
J
J
jon117c

wrote on last edited by

#25

@God8809 you dont drag it into the bat. you put the bat in the same folder as you VRCW then run the .bat and it will load that world. make sure there is only 1 world so it loads the right one. i make a different folder for each world.
1 Reply Last reply

0
N Nicenick

Bump
A
A
aassdd121

wrote on last edited by

#26

@Nicenick [register or login to view this hidden content] is this link doesn't work?
N 1 Reply Last reply

1
L
L
LaliaLalaila

wrote on last edited by

#27

Can't find the gate on Room for Dancing-Side.B, its just a room with a portal and the vip message
1 Reply Last reply

0
A aassdd121

@Nicenick [register or login to view this hidden content] is this link doesn't work?
N
N
Nicenick

wrote on last edited by

#28

@aassdd121 It does work the link, in my mind i wanted something more direct, also for some reasons my brain thinks this is not whole or something, could you kindly explain to me what is inside this VRCW? please thank you?
1 Reply Last reply

0
S
S
SymphoniaLoud

wrote on last edited by

#29

Just tried to upload "Room for Dancing side B" but it failed because of their size being too big.

did anyone ever manage it to opload?
Please dont forget to upvote :)
1 Reply Last reply

0
M
M
momokan

wrote on last edited by

#30

How to use VRmode?
J 1 Reply Last reply

0
T tare1919
Here's a simple way to open a VRCW file locally.
Just save the following as a batch file (.bat), then simply drag and drop your VRCW file onto it.
You'll need to change the GameDir and GameExe paths to match your VRChat installation.
```
@echo off

set GameDir="C:\Program Files (x86)\Steam\steamapps\common\VRChat\"
set GameExe="C:\Program Files (x86)\Steam\steamapps\common\VRChat\VRChat.exe"

if "%~1"=="" (
    echo Please drag and drop a VRCW file onto this batch file.
    pause
    exit /b
)

set "path=%~1"
set /a "randomid_a=10000+%random%"
set /a "randomid_b=10000+%random%"
set "randomid=%randomid_a%%randomid_b%"

start "" /D %GameDir% %GameExe% "--url=create?roomId=%randomid%&hidden=true&name=BuildAndRun&url=file:///%path%" --no-vr --watch-worlds --watch-avatars
```
However, due to VRChat's encryption, it's not possible to load multiple avatars using alternate accounts, so dances or animations that require two or more avatars generally won't work with this method.
If there is a VRCW hotswap method available, that would probably be a better approach, but I don't know how to do it..
C
C
cheatdev

wrote on last edited by cheatdev

#31

@tare1919 Maybe you should credit it: https://github.com/eeacks/VRChat-ALT
@SquidieBlendie Yes there is VR version in the repository
N 1 Reply Last reply

1
M momokan

How to use VRmode?
J
J
jon117c

wrote on last edited by

#32

@momokan use the same bat but remove the " --no-vr " from the start line at the bottom. it will load in vr
M N 2 Replies Last reply

0
J jon117c

@momokan use the same bat but remove the " --no-vr " from the start line at the bottom. it will load in vr
M
M
momokan

wrote on last edited by

#33

@jon117c THX!!
1 Reply Last reply

0
C cheatdev

@tare1919 Maybe you should credit it: https://github.com/eeacks/VRChat-ALT
@SquidieBlendie Yes there is VR version in the repository
N
N
Nicenick

wrote on last edited by

#34

@cheatdev Thanks
1 Reply Last reply

0
J jon117c

@momokan use the same bat but remove the " --no-vr " from the start line at the bottom. it will load in vr
N
N
Nicenick

wrote on last edited by

#35

@jon117c Does not work
1 Reply Last reply

0
N
N
Nicenick

wrote on last edited by Nicenick

#36

illstudio VRCW does not work

Edit: I used the following BAT file because i want to open them in VR, tried to fix it with AI but nothing worked, tried other VRCW as well https://github.com/eeacks/VRChat-ALT
O 1 Reply Last reply

0

Hello! It looks like you're interested in this conversation, but you don't have an account yet.

Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

With your input, this post could be even better 💗

1
2
3