RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA
-
Decided to do this kind of all-in-one, some stuff I found poking through the avatars/thread.
@Texlerex said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Does anyone know the pin code for the christmas fnc avis?
Christmas Frenni: 623842
Christmas Chiku: 653242@VRCavi21x said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Has anyone gotten the Codes for the Code Locked avis such as the Blade Wolf?
@Habradab99 said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Has anyone gotten the codes for the code locked avis such as the Blade Wolf and christmas frenni yet? or at least know how to find them?
Blade Wolf: 247612
But @Habradab99's method to just remove it also works:
https://forum.ripper.store/post/667344
(I was afraid that it would double-scramble it, but Gabsith made it smart enough to clean up correctly.)
I also figured out that it makes a backup of the FX before it modifies it, and you can swap the backup into the FX slot on the avatar. If you do that, the Lock/Pin submenu will still be there, but the avatar won't be locked.Some of the un-named avatars from the initial google drive dump:
-
From cache no names-avtr_6da3ed0e-95ca-4d03-a744-7a015f8d4c90_pc.vrca
"Vicky Tha Baddie BunBun" by ༒༺Cookiesnott༻༒ -
From cache no names-avtr_22cbab12-c07d-4e3b-a5a1-2c5a24f67268_pc.vrca
"The Poopet from Twitter" by Losing-Ipuu -
From cache no names-avtr_60394f25-5058-431d-ac06-444d98ae82e2_pc.vrca
"Updated Fenni 2" by Losing-Ipuu -
From cache no names-avtr_c5392ce3-9c24-4caa-89c6-e02984f5bc4f_pc.vrca
"Lefty Frenni" by SkyThePony
The other two just said Avatar Not Found when I looked them up.
The Christmas Frenni avatar was doing the "Motorcycle pose" and Christmas Chiku's view point was down in her cleavage for some reason. I think I fixed both, if somebody wants me to upload them somewhere. (Unless somebody else already did, and I missed the post) I say "think" because both of them were 30-something MB when I opened them and the fixed ones are 5-10 MB so I might've screwed something up. (Shaders?) They re-imported and looked right when I tested, but I am noob.
'preciate upvotes, but if I'm just pointing at somebody else's post, go give them an upvote, too :)
-
-
Decided to do this kind of all-in-one, some stuff I found poking through the avatars/thread.
@Texlerex said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Does anyone know the pin code for the christmas fnc avis?
Christmas Frenni: 623842
Christmas Chiku: 653242@VRCavi21x said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Has anyone gotten the Codes for the Code Locked avis such as the Blade Wolf?
@Habradab99 said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Has anyone gotten the codes for the code locked avis such as the Blade Wolf and christmas frenni yet? or at least know how to find them?
Blade Wolf: 247612
But @Habradab99's method to just remove it also works:
https://forum.ripper.store/post/667344
(I was afraid that it would double-scramble it, but Gabsith made it smart enough to clean up correctly.)
I also figured out that it makes a backup of the FX before it modifies it, and you can swap the backup into the FX slot on the avatar. If you do that, the Lock/Pin submenu will still be there, but the avatar won't be locked.Some of the un-named avatars from the initial google drive dump:
-
From cache no names-avtr_6da3ed0e-95ca-4d03-a744-7a015f8d4c90_pc.vrca
"Vicky Tha Baddie BunBun" by ༒༺Cookiesnott༻༒ -
From cache no names-avtr_22cbab12-c07d-4e3b-a5a1-2c5a24f67268_pc.vrca
"The Poopet from Twitter" by Losing-Ipuu -
From cache no names-avtr_60394f25-5058-431d-ac06-444d98ae82e2_pc.vrca
"Updated Fenni 2" by Losing-Ipuu -
From cache no names-avtr_c5392ce3-9c24-4caa-89c6-e02984f5bc4f_pc.vrca
"Lefty Frenni" by SkyThePony
The other two just said Avatar Not Found when I looked them up.
The Christmas Frenni avatar was doing the "Motorcycle pose" and Christmas Chiku's view point was down in her cleavage for some reason. I think I fixed both, if somebody wants me to upload them somewhere. (Unless somebody else already did, and I missed the post) I say "think" because both of them were 30-something MB when I opened them and the fixed ones are 5-10 MB so I might've screwed something up. (Shaders?) They re-imported and looked right when I tested, but I am noob.
@catsyrup5000 Y E S I thought all hope was lost on those codes, thank you so much!
-
-
for people to see the model
FBX with texture
@Imnotaripper. SO WHEN WILL THIS BE DOOOONE
BIIIG BUMP -
@Imnotaripper. SO WHEN WILL THIS BE DOOOONE
BIIIG BUMP -
Bumping for Chica again.
-
@Moxxie_Imp https://forum.ripper.store/post/907741 should be it, idk i didnt check the workupload
-
If it's not too much to ask, can someone convert Cryptia bunny and Fazclairs redisigned to sfm?
@komin if you mean cryptias old ones, check on sfmlab! i think i seen them uploaded there converted
-
@komin if you mean cryptias old ones, check on sfmlab! i think i seen them uploaded there converted
@lovenightsky No, I'm referring to the new models (and mainly the models of his OC).
-
Does anyone have any or all ipuus codes for there Avis TnT
-
Decided to do this kind of all-in-one, some stuff I found poking through the avatars/thread.
@Texlerex said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Does anyone know the pin code for the christmas fnc avis?
Christmas Frenni: 623842
Christmas Chiku: 653242@VRCavi21x said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Has anyone gotten the Codes for the Code Locked avis such as the Blade Wolf?
@Habradab99 said in RIPPED CRYPTIA AVATARS MEGATHREAD + EXTRA:
Has anyone gotten the codes for the code locked avis such as the Blade Wolf and christmas frenni yet? or at least know how to find them?
Blade Wolf: 247612
But @Habradab99's method to just remove it also works:
https://forum.ripper.store/post/667344
(I was afraid that it would double-scramble it, but Gabsith made it smart enough to clean up correctly.)
I also figured out that it makes a backup of the FX before it modifies it, and you can swap the backup into the FX slot on the avatar. If you do that, the Lock/Pin submenu will still be there, but the avatar won't be locked.Some of the un-named avatars from the initial google drive dump:
-
From cache no names-avtr_6da3ed0e-95ca-4d03-a744-7a015f8d4c90_pc.vrca
"Vicky Tha Baddie BunBun" by ༒༺Cookiesnott༻༒ -
From cache no names-avtr_22cbab12-c07d-4e3b-a5a1-2c5a24f67268_pc.vrca
"The Poopet from Twitter" by Losing-Ipuu -
From cache no names-avtr_60394f25-5058-431d-ac06-444d98ae82e2_pc.vrca
"Updated Fenni 2" by Losing-Ipuu -
From cache no names-avtr_c5392ce3-9c24-4caa-89c6-e02984f5bc4f_pc.vrca
"Lefty Frenni" by SkyThePony
The other two just said Avatar Not Found when I looked them up.
The Christmas Frenni avatar was doing the "Motorcycle pose" and Christmas Chiku's view point was down in her cleavage for some reason. I think I fixed both, if somebody wants me to upload them somewhere. (Unless somebody else already did, and I missed the post) I say "think" because both of them were 30-something MB when I opened them and the fixed ones are 5-10 MB so I might've screwed something up. (Shaders?) They re-imported and looked right when I tested, but I am noob.
-
-
@AyoTed
Did Cryptia really make MLP models? I've never seen. Please share some renders or screenshots. -
@Finvosrok wasnt cryptica it was the same person who made the raven team leader model i think
@mymelox3 Nope, cryptia didn't even make MLP models, people are just referring to edits that other people made.
-
@catsyrup5000
I can't decrypt them or make them work, so I'd appreciate it if you uploaded the fixed models using workupload.
@Finvosrok
No clue what I did, but a few days ago when I re-exported the unitypackages, the file size was closer to the original. I'm not at my computer right now, but I'll see what I can do a little later. If by "encrypted" you mean the pin/lock code thing, @Habradab99's post in https://forum.ripper.store/post/667344 explains how to just remove it. I'm still a newbie at this. -
@Finvosrok
No clue what I did, but a few days ago when I re-exported the unitypackages, the file size was closer to the original. I'm not at my computer right now, but I'll see what I can do a little later. If by "encrypted" you mean the pin/lock code thing, @Habradab99's post in https://forum.ripper.store/post/667344 explains how to just remove it. I'm still a newbie at this.@Finvosrok
Okay, it won't let me edit my last post, so here's the update:Christmas Frenni:
Changes from @bsandrate's original google drive upload:- fixed "motorcycle pose"
- renamed "Scene" to "Open Me!"
- renamed the avatars from prefab_id_ to Christmas Frenni
- removed PIN lock
Christmas Chiku:
Changes from @bsandrate's original google drive upload:- fixed view point being way too low
- renamed "Scene" to "Open Me!"
- renamed the avatars from prefab_id_whatever to Christmas Chiku
- removed PIN lock
You should only need to add VRCFury when you create a new project.
Please, please let me know how these work for you, I'm still learning how everything works.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login