GIFT: live2d cubism 5.2+ crack
-
Worked! Thankiu
-
hello everyone! there is a way to crack the live2d cubism program but its only for 5.0 version, since we're now on 5.2, i've been looking around for a way to crack it. fortunately, very recently, someone did managed to find a way to crack it and shared the method! but since the og guide is kinda outdated and the file required to use for the crack was taken down, i'm updating the guide and sharing it here!
keep in mind this is specifically made for 5.2+ version, idk if this will work for older (before 5.0) and future version (before and when 6.0 releases)...
consider upvoting this post to increase my rep pls ^^
live2d cubism 5.2+ crack guide:
-
download/update l2d cubism from the official website, you can use either the latest release version (currently 5.2.02) or the beta version (currently 5.2.03 beta2), i'm using the release version
-
setup the program
-
download this rlm1603.zip zipped folder
-
extract the zipped folder which contains a .jar file called rlm1603.jar
-
you must rename the .jar file by adding whatever word you want! for example, you can add "_mod" or "_crack" at the end so it's called "rlm1603_mod.jar" (i will be using this as example) or "rlm1603_crack.jar" instead, this will be crucial in a later step
-
find your "live2d cubism" folder in your "program files" (C:\Program Files\Live2D Cubism 5.2), go to "apps" folder, and then "lib" folder (C:\Program Files\Live2D Cubism 5.2\app\lib)
-
move your renamed "rlm1603.jar" file (aka rlm1603_mod.jar) into the "lib" folder, you may need to provide administrator permission (important note: in the "lib" folder, there's already a "rlm1603.jar" file inside which is from live2d cubism, but you must not replace/delete it!!!)
-
return to the "live2d cubism" folder (C:\Program Files\Live2D Cubism 5.2) and look at these four .bat files (CubismEditor5.bat, CubismEditor5_d3d.bat, CubismViewer5.bat, & CubismViewer5_d3d.bat [not including ProxyConfig.bat!!!])
-
for each of these .bat files, right-click them to edit them in notepad
-
ctrl+f and search "rlm", you will see it highlighted with "rlm1603.jar", rename it to whatever you had named in step 5 (for example, rlm1603_mod.jar) and repeat this for each .bat files (you might not be able to save the edited files, so just save them somewhere else then drag them back to the "live2d cubism" folder to replace them, you may need to provide administrator permission again)
note: idk if some of you are being blind, but i clearly stated that you may need to provide administrator permission for certain things when you're moving files & saving the .bat files elsewhere and moving them back to replace the unedited .bat files... also i will make a vid tutorial on this soon for visual learners
finally, the editor should work now!
fyi, you will get a popup saying about online use authentication, but you don't have to worry, you can use it just fine while online!
also in future updates (like 5.3+), as long as live2d cubism's .jar file is "rlm1603.jar", this guide may still be able to work! if not, then we will have to wait for an updated crack ver of the .jar file! but you cannot reuse the four edited .bat files as the files inside 5.2 will be different in future updates, so just redo the final step!
@hironoflan I think they cracked down on it.. any cracked versions of 5.0 or later no longer work
-
-
@Wawant srry I forgot about this hahaha
Here it is for anyone who wants to see it or download it. I've explained it step by step so no one gets confused.
I don't know how long MEGA will keep it, but here it is for anyone who wants it. (You can see it without download)To resolve other questions like the ones above, it says 7 days, but that will continue.
And as for updating, well, yes, you repeat the steps, and if it works, fantastic. @erinya @vampnyan -
thank you sm! Instructions are so easy to follow
-
oh my gosh it worked! this is such a lifesaver aahh!!! if anyone has any questions or need help, feel free to ask me! ill do my best
️ -
Still working for 5.3 ~ Tysm!
using notepad++ made it way easier to edit the .bat files for me -
Waiting 5.3 version.
-
-
hello everyone! there is a way to crack the live2d cubism program but its only for 5.0 version, since we're now on 5.2, i've been looking around for a way to crack it. fortunately, very recently, someone did managed to find a way to crack it and shared the method! but since the og guide is kinda outdated and the file required to use for the crack was taken down, i'm updating the guide and sharing it here!
keep in mind this is specifically made for 5.2+ version, idk if this will work for older (before 5.0) and future version (before and when 6.0 releases)...
consider upvoting this post to increase my rep pls ^^
live2d cubism 5.2+ crack guide:
-
download/update l2d cubism from the official website, you can use either the latest release version (currently 5.2.02) or the beta version (currently 5.2.03 beta2), i'm using the release version
-
setup the program
-
download this rlm1603.zip zipped folder
-
extract the zipped folder which contains a .jar file called rlm1603.jar
-
you must rename the .jar file by adding whatever word you want! for example, you can add "_mod" or "_crack" at the end so it's called "rlm1603_mod.jar" (i will be using this as example) or "rlm1603_crack.jar" instead, this will be crucial in a later step
-
find your "live2d cubism" folder in your "program files" (C:\Program Files\Live2D Cubism 5.2), go to "apps" folder, and then "lib" folder (C:\Program Files\Live2D Cubism 5.2\app\lib)
-
move your renamed "rlm1603.jar" file (aka rlm1603_mod.jar) into the "lib" folder, you may need to provide administrator permission (important note: in the "lib" folder, there's already a "rlm1603.jar" file inside which is from live2d cubism, but you must not replace/delete it!!!)
-
return to the "live2d cubism" folder (C:\Program Files\Live2D Cubism 5.2) and look at these four .bat files (CubismEditor5.bat, CubismEditor5_d3d.bat, CubismViewer5.bat, & CubismViewer5_d3d.bat [not including ProxyConfig.bat!!!])
-
for each of these .bat files, right-click them to edit them in notepad
-
ctrl+f and search "rlm", you will see it highlighted with "rlm1603.jar", rename it to whatever you had named in step 5 (for example, rlm1603_mod.jar) and repeat this for each .bat files (you might not be able to save the edited files, so just save them somewhere else then drag them back to the "live2d cubism" folder to replace them, you may need to provide administrator permission again)
note: idk if some of you are being blind, but i clearly stated that you may need to provide administrator permission for certain things when you're moving files & saving the .bat files elsewhere and moving them back to replace the unedited .bat files... also i will make a vid tutorial on this soon for visual learners
finally, the editor should work now!
fyi, you will get a popup saying about online use authentication, but you don't have to worry, you can use it just fine while online!
also in future updates (like 5.3+), as long as live2d cubism's .jar file is "rlm1603.jar", this guide may still be able to work! if not, then we will have to wait for an updated crack ver of the .jar file! but you cannot reuse the four edited .bat files as the files inside 5.2 will be different in future updates, so just redo the final step!
@hironoflan WORKED OMGG thank you sm nice human!!
-
-
This works for 5.3: https://git.disroot.org/kiraio/LoveLive2D
-
29/08/2026, Live2d Cubism ver. 5.3.03 still work, also i have both ver. 5.2 and 5.3, keeping the 5.2 alive just incase 5.3 fail lol
will try later for ver. 5.4 when it released and keep this tread updated
thanks for this btw : > -
hello everyone! there is a way to crack the live2d cubism program but its only for 5.0 version, since we're now on 5.2, i've been looking around for a way to crack it. fortunately, very recently, someone did managed to find a way to crack it and shared the method! but since the og guide is kinda outdated and the file required to use for the crack was taken down, i'm updating the guide and sharing it here!
keep in mind this is specifically made for 5.2+ version, idk if this will work for older (before 5.0) and future version (before and when 6.0 releases)...
consider upvoting this post to increase my rep pls ^^
live2d cubism 5.2+ crack guide:
-
download/update l2d cubism from the official website, you can use either the latest release version (currently 5.2.02) or the beta version (currently 5.2.03 beta2), i'm using the release version
-
setup the program
-
download this rlm1603.zip zipped folder
-
extract the zipped folder which contains a .jar file called rlm1603.jar
-
you must rename the .jar file by adding whatever word you want! for example, you can add "_mod" or "_crack" at the end so it's called "rlm1603_mod.jar" (i will be using this as example) or "rlm1603_crack.jar" instead, this will be crucial in a later step
-
find your "live2d cubism" folder in your "program files" (C:\Program Files\Live2D Cubism 5.2), go to "apps" folder, and then "lib" folder (C:\Program Files\Live2D Cubism 5.2\app\lib)
-
move your renamed "rlm1603.jar" file (aka rlm1603_mod.jar) into the "lib" folder, you may need to provide administrator permission (important note: in the "lib" folder, there's already a "rlm1603.jar" file inside which is from live2d cubism, but you must not replace/delete it!!!)
-
return to the "live2d cubism" folder (C:\Program Files\Live2D Cubism 5.2) and look at these four .bat files (CubismEditor5.bat, CubismEditor5_d3d.bat, CubismViewer5.bat, & CubismViewer5_d3d.bat [not including ProxyConfig.bat!!!])
-
for each of these .bat files, right-click them to edit them in notepad
-
ctrl+f and search "rlm", you will see it highlighted with "rlm1603.jar", rename it to whatever you had named in step 5 (for example, rlm1603_mod.jar) and repeat this for each .bat files (you might not be able to save the edited files, so just save them somewhere else then drag them back to the "live2d cubism" folder to replace them, you may need to provide administrator permission again)
note: idk if some of you are being blind, but i clearly stated that you may need to provide administrator permission for certain things when you're moving files & saving the .bat files elsewhere and moving them back to replace the unedited .bat files... also i will make a vid tutorial on this soon for visual learners
finally, the editor should work now!
fyi, you will get a popup saying about online use authentication, but you don't have to worry, you can use it just fine while online!
also in future updates (like 5.3+), as long as live2d cubism's .jar file is "rlm1603.jar", this guide may still be able to work! if not, then we will have to wait for an updated crack ver of the .jar file! but you cannot reuse the four edited .bat files as the files inside 5.2 will be different in future updates, so just redo the final step!
@hironoflan it still ask me to to activate a licens, how can i fix that i did everything perfectly
-
-
@hironoflan it still ask me to to activate a licens, how can i fix that i did everything perfectly
-
Hello! Thank you very much for the tutorial and archives! It seems like it worked wonders, even now on the current Live2D version (which is the 5.3.04 version).
Has anyone tried updating this "cracked" version, though? I'll try it anyway sometime, but if so, does it work? Or will I need to re-crack it (which is also easy enough, thankfully)?
Again, thanks a lot!
Download Link (mega.nz)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login